Trafiksäkerhetssystem

No moisture problems thanks to the aluminum cushion and hot-dip galvanized structure. Excellent design, with pre-bent aluminum tubes at the top and bottom of the cushion. Easily replaceable pre-attenuator (bolt connection).

Available in many different RAL colors.

• Tested according to NCHRP-350 TL III (3-50 | 3-51 | 3-52 | 3-53).
• Standard 100K crash cushion, entirely aluminum except for the hot-dip galvanized backplate.
• Equipped with a 10-pin connector.
• The unit can be controlled from an optional control unit in the machine.
• The TMA has a plug (175A) that allows the entire unit to be powered from the vehicle.
• The unit operates on 12 or 24 volts.
• Integrated LED taillights in the structure.
• Includes test certificates and CE marking.

Selectable flashing light/light bar between the pre-attenuator and the cushion.

Optional accessories:

• Reflective tape on the back of the TMA cushion
• LED warning lights next to the license plate
• LED arrow boards

No moisture problems thanks to the aluminum cushion and hot-dip galvanized structure. Excellent design, with pre-bent aluminum tubes at the top and bottom of the cushion. Easily replaceable pre-attenuator (bolt connection).

Available in many different RAL colors.

• Tested according to NCHRP-350 TL III (3-50 | 3-51 | 3-52).
• TTMA 100K crash cushion, entirely aluminum except for the hot-dip galvanized backplate.
• DIN towing eye 40 or 50 (40 standard, 50 on request). The height of the truck's towing eye must be 1000 mm (+/- 5%).
• 24 V DC headlights and side lights. Crash energy-absorbing specially designed tow hook.
• Includes test certificates and CE marking.
• Rear reflector for the cushion's pre-attenuator available on request.
• Rubber torsion spring.
• Jockey wheel and 10-inch tires.
• Weight 726 kg (without optional arrow board).

Selectable flashing light/light bar between the pre-attenuator and the cushion. Approved height-adjustable tow hook system with brake for a 1350 kg axle (mandatory with optional arrow board if a license plate is required for a trailer over 750 kg).

Optional accessories:

• Hydraulic folding arrow board
• Wireless remote control

• Full-scale crash tested according to NCHRP 350 TL-3 70 KPH (3-50/3-51/3-52/3-53).
• 15-meter long cable for the controller.
• Two hydraulic cylinders for raising and lowering the crash cushion.
• Hot-dip galvanized steel structure.

• Fully aluminum housing, painted
• Dimensions: 1100mm (W) x 1150mm (H)
• Weight: 45kg
• Protection: IP65 Equipped with 15x yellow Verdegro 200mm LED lights, EN12352:2006+ AC:2009(L8m)
• 24VDC, 290mA, 7W
• Standard functions LP15: arrow left, arrow right, cross, warning (four corner lights)
• Voltage: 12/24 V
• Standard equipment includes a 4-button wired cab controller
• Includes user manual
• CE approved

• Optional combined TMA and LP15 wired cab controller with additional function buttons.
• Optional features include a light controller integrated with the optional TMA control unit for beacons and work lights, which can be directly connected to the controller's circuit board.